KDF-2HA
Semi-Automatic Capsule Filling Machine (Horizontal Type )
|
GENERAL:
This equipment is a new model
horizontal semi-automatic capsule filling machine KDF-2HA
developed by Kwang Dah.
This model can choose the number of turns and speed when
filling, and the operation is simpler, also more accurate and
Safe, for filling powders and granules (round granules) with
good fluidity, greatly improving its efficiency and reducing
capsule loss rate. In addition, it is easier to clean and
maintain and meet the requirements of cG.M.P. and PIC/S.
It is suitable for small and medium pharmaceutical factories,
health care products factories, and hospital preparation rooms. |
| |
FEATURES:
| 1. |
The casing, tabletop
and powder hopper of the whole machine are all made of stainless
steel, conforming to cG.M.P. standards. |
| 2. |
There is no baking
varnish treatment on the machine surface, so it can avoid the
baking varnish falling off, mixing into the powder, and then
filling into the capsule. |
| 3. |
Separate power and
fixed-point filling make the filling volume very accurate. |
| 4. |
100% capsule filling,
no loss or waste of any capsule. |
| 5. |
Special design, using
different types of capsules, easy change mold (within 20
minutes). |
| 6. |
Simple structure,
easy maintenance and simple cleaning. |
| 7. |
No noise, easy to
operate, you can fully learn to operate within ten minutes. |
| 8. |
This machine has a
forced filling device, especially for the powder with poor
fluidity, it can be filled many times to achieve accurate
weight. |
| 9. |
Applicable to various
powders and granules (round granules). |
| 10. |
When the rotating
disk is aimed at tighter capsules, it can rotate more times to
separate capsule caps and bodies. |
| 11. |
The speed of powder
filling can be adjusted. |
| |
| |
|
|
OPERATIONS:
There
are 3 stations in the KDF-2HA and they are as follows.
 |
THE FIRST
STATION:ORIENTATION OF CAPSULE
The function of first station includes capsule
feeding, aligning and insertion into bores of holding
ring . Also, vacuum is used for separating capsule cap
and body in first station.
After orientation of capsule, capsule cap can stay
in upper holding ring and capsule body can stay in lower
holding ring. |
THE SECOND STATION:POWDER FILLING
Separate the holding ring, put the lower (capsule
body) holding ring on the rotary table, pull the powder
hopper over the lower (capsule body) holding ring, then
auger inside powder hopper starts to run and fill powder
into the capsule body.
While Iower holding ring turns one cycle, push
powder hopped to its original opsition. |
 |
 |
THE THIRD STATION:CAPSULE CLOSING
Put upper holding ring and lower holding ring
together, then take the holding ring ahead of ejector
and aim ejector at the bores of holding ring. Pushing
the ejector under the operating table. Then using air
cylinder to push ejector and let it press the capsules
for closing.
Pull out the ejector, and finally pouring the
finished capsules into container. |
|
OTHER PRODUCTS
|
1.
|
Auto capsule
filling machine. |
|
2.
|
Batch
counter. |
|
3.
|
Auto strip
pack machine. |
|
4.
|
Auto blister
pack machine. |
|
5.
|
Capsule
polishing machine |
|
6.
|
Capsules/tablets inspection machine. |
|
7.
|
Auto count &
container feeding machine. |
|
8.
|
Automatic soft gelatine capsule making machine. |
APPLICABILTY
|
1.
|
Can fill
capsule sizes 00-0-1-2-3-4-5. |
|
2.
|
Can fill
material in either powder or granule forms. |
|
|
|
|
TECHNICAL DATA:
|
Capacity
|
Max. 25,000 pcs/hr |
|
Power Supply |
AC 220/380V, 50/60
HZ, 3P |
|
Air Consumption |
6 kg/cm2, 125 l/min |
|
Power Consumption |
2.5 kw |
|
Machine Size (LxWxH) |
150 x 100 x 160 cm |
|
Packing Size (LxWxH) |
190 x 120 x 180 cm |
|
Net Weight |
600
kgs
|
|
Gross Weight |
740 kgs |
|
◎ The
specification, appearance and dimensions shall be subject to change
without
prior notice.
◎ Other KD machine series please browse our website check to detail.
|
